FEATURES
Operating Input Voltage 2.25 V to 5.5 V
Output Voltage as Low as 0.7 V
1% Internal 0.7 V Reference
Predictive Gate Drive N-Channel MOSFET Drivers for Higher Efficiency
Externally Adjustable Soft-Start and Overcurrent Limit
Fixed-Frequency Voltage-Mode Control
− TPS40007, 300 kHz
− TPS40009, 600 kHz
Source/Sink with VOUT Prebias
10-Lead MSOP PowerPad Package for Higher Performance
Thermal Shutdown
Internal Boostrap Diode S
APPLICATIONS
Networking Equipment
Telecom Equipment
Base Stations Servers
DSP Power
Power Modules
DESCRIPTION
The TPS4000x are controllers for low-voltage, non-isolated synchronous buck regulators. These controllers drive an N-channel MOSFET for the primary buck switch, and an N-channel MOSFET for the synchronous rectifier switch, thereby achieving very high-efficiency power conversion. In addition, the device controls the delays from main switch off to rectifier turn-on and from rectifier turn-off to main switch turn-on in such a way as to minimize diode losses (both conduction and recovery) in the synchronous rectifier with TI’s proprietary Predictive Gate Drive technology. The reduction in these losses is significant and increases efficiency. For a given converter power level, smaller FETs can be used, or heat sinking can be reduced or even eliminated.
SIMPLIFIED APPLICATION DIAGRAM
TPS40007DGQR New and Original in the stock, welcome to send the request to us!