FEATURES
12-bit plus sign SAR ADC
True bipolar input ranges
Software-selectable input ranges
±10 V, ±5 V, ±2.5 V, 0 V to +10 V
Military temperature range: −55°C to +125°C
500 kSPS throughput rate
8 analog input channels with channel sequencer
Single-ended, true differential, and pseudo differential
analog input capability
High analog input impedance
Low power: 18 mW
Temperature indicator
Full power signal bandwidth: 22 MHz
Internal 2.5 V reference
High speed serial interface
Power-down modes
Controlled manufacturing baseline
Single assembly/test site
20-lead TSSOP package
iCMOS process technology
Qualification data available on request
ENHANCED PRODUCT FEATURES
Supports defense and aerospace applications (AQEC standard)
Military temperature range: −55°C to +105°C
Controlled manufacturing baseline
One assembly/test site
One fabrication site
Enhanced product change notification
Qualification data available on request
GENERAL DESCRIPTION
The AD7327-EP1 is an 8-channel, 12-bit plus sign successive
approximation ADC designed on the iCMOS™ (industrial CMOS)
process. It enables the development of a wide range of high
performance analog ICs capable of 33 V operation in a footprint
that no previous generation of high voltage devices achieved.
Unlike analog ICs using conventional CMOS processes, iCMOS
components can accept bipolar input signals while providing
increased performance, dramatically reduced power consumption,
and reduced package size.
The AD7327-EP can accept true bipolar analog input signals,
software-selectable from ±10 V, ±5 V, ±2.5 V, and 0 V to +10 V.
Each analog input channel can be independently programmed
to one of the four input ranges. The analog input channels on
the AD7327-EP can be programmed to be single-ended, true
differential, or pseudo differential.
The ADC contains a 2.5 V internal reference. The AD7327-EP
also allows external reference operation. If a 3 V reference is
applied to the REFIN/OUT pin, the AD7327-EP can accept a
true bipolar ±12 V analog input. Minimum ±12 V VDD and VSS
supplies are required for the ±12 V input range. The ADC has a
high speed serial interface that can operate at throughput rates up
to 500 kSPS
The AD7327-EP is housed in a 20-lead TSSOP with operation
specified from −55°C to +125°C. Additional application and
technical information can be found in the AD7327 data sheet.
PRODUCT HIGHLIGHTS
1. The AD7327-EP can accept true bipolar analog input
signals, ±10 V, ±5 V, ±2.5 V, and 0 V to +10 V (unipolar).
2. The eight analog inputs can be configured as eight singleended
inputs, four true differential inputs, four pseudo
differential inputs, or seven pseudo differential inputs.
3. 500 kSPS serial interface. SPI®-/QSPI™-/DSP-/MICROWIRE™-
compatible interface.
4. Low power, 18 mW, at a maximum throughput rate of
500 kSPS.
5. Channel sequencer.
AD7327BRUZ New and Original in the stock, Welcome to send the request to us!
Contact us if you have any questions or need help.
LINGCHENG makes your dream comes true.