• Only 49 Instructions to Learn: - All single-cycle instructions except branches

• Operating Speed: - DC – 32 MHz oscillator/clock input - DC – 125 ns instruction cycle

• Up to 16K x 14 Words of Flash Program Memory

• Up to 1024 Bytes of Data Memory (RAM)

• Interrupt Capability with Automatic Context Saving

• 16-Level Deep Hardware Stack

• Direct, Indirect and Relative Addressing modes

• Processor Read Access to Program Memory

• Pinout Compatible to other 28/40/44-pin PIC16CXXX and PIC16FXXX Microcontrollers

Special Microcontroller Features:

• Precision Internal Oscillator: - Factory calibrated to ±1%, typical - Software selectable frequency range from 32 MHz to 31 kHz

• Power-Saving Sleep mode

• Power-on Reset (POR)

• Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)

• Brown-out Reset (BOR) - Selectable between two trip points - Disable in Sleep option

• Multiplexed Master Clear with Pull-up/Input Pin

• Programmable Code Protection

• High Endurance Flash/EEPROM cell: - 100,000 write Flash endurance - 1,000,000 write EEPROM endurance - Flash/Data EEPROM retention: > 40 years

• Wide Operating Voltage Range: - 1.8V-5.5V (PIC16F193X) - 1.8V-3.6V (PIC16LF193X)

PIC16LF193X Low-Power Features:

• Standby Current: - 60 nA @ 1.8V, typical

• Operating Current: - 7.0 A @ 32 kHz, 1.8V, typical (PIC16LF193X) - 150 A @ 1 MHz, 1.8V, typical (PIC16LF193X)

• Timer1 Oscillator Current: - 600 nA @ 32 kHz, 1.8V, typical • Low-Power Watchdog Timer Current: - 500 nA @ 1.8V, typical (PIC16LF193X)

Peripheral Features:

• Up to 35 I/O Pins and 1 Input-only Pin: - High-current source/sink for direct LED drive - Individually programmable interrupt-on-pin change pins - Individually programmable weak pull-ups

• Integrated LCD Controller: - Up to 96 segments - Variable clock input - Contrast control - Internal voltage reference selections

• Capacitive Sensing module (mTouchTM) - Up to 16 selectable channels

• A/D Converter: - 10-bit resolution and up to 14 channels - Selectable 1.024/2.048/4.096V voltage reference

• Timer0: 8-Bit Timer/Counter with 8-Bit Programmable Prescaler

• Enhanced Timer1 - Dedicated low-power 32 kHz oscillator driver - 16-bit timer/counter with prescaler - External Gate Input mode with toggle and single shot modes - Interrupt-on-gate completion

• Timer2, 4, 6: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler

• Two Capture, Compare, PWM modules (CCP) - 16-bit Capture, max. resolution 125 ns - 16-bit Compare, max. resolution 125 ns - 10-bit PWM, max. frequency 31.25 kHz

• Three Enhanced Capture, Compare, PWM modules (ECCP) - 3 PWM time-base options - Auto-shutdown and auto-restart - PWM steering - Programmable dead-band delay

Peripheral Features (Continued):

• Master Synchronous Serial Port (MSSP) with SPI and I2CTM with: - 7-bit address masking - SMBus/PMBusTM compatibility - Auto-wake-up on start

• Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) - RS-232, RS-485 and LIN compatible - Auto-Baud Detect

• SR Latch (555 Timer): - Multiple Set/Reset input options - Emulates 555 Timer applications

• 2 Comparators: - Rail-to-rail inputs/outputs - Power mode control - Software enable hysteresis

• Voltage Reference module: - Fixed Voltage Reference (FVR) with 1.024V, 2.048V and 4.096V output levels - 5-bit rail-to-rail resistive DAC with positive and negative reference selection