• Ultra-low-power with FlexPowerControl

– 1.71 V to 3.6 V power supply

– -40 °C to 85/105/125 °C temperature range

– 300 nA in VBAT mode: supply for RTC and 32x32-bit backup registers

– 30 nA Shutdown mode (5 wakeup pins)

– 120 nA Standby mode (5 wakeup pins)

– 420 nA Standby mode with RTC

– 1.1 µA Stop 2 mode, 1.4 µA with RTC

– 100 µA/MHz run mode (LDO Mode)

– 39 μA/MHz run mode (@3.3 V SMPS Mode)

– Batch acquisition mode (BAM)

– 4 µs wakeup from Stop mode

– Brown out reset (BOR)

– Interconnect matrix

• Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait-state execution from Flash memory, frequency up to 80 MHz, MPU, 100DMIPS and DSP instructions

• Performance benchmark

– 1.25 DMIPS/MHz (Drystone 2.1)

– 273.55 CoreMark® (3.42 CoreMark/MHz @ 80 MHz)

• Energy benchmark

– 294 ULPMark™ CP score

– 106 ULPMark™ PP score

• Clock Sources

– 4 to 48 MHz crystal oscillator

– 32 kHz crystal oscillator for RTC (LSE)

– Internal 16 MHz factory-trimmed RC (±1%)

– Internal low-power 32 kHz RC (±5%)

– Internal multispeed 100 kHz to 48 MHz oscillator, auto-trimmed by LSE (better than ±0.25 % accuracy)

– 3 PLLs for system clock, USB, audio, ADC

• Up to 114 fast I/Os, most 5 V-tolerant, up to 14 I/Os with independent supply down to 1.08 V

• RTC with HW calendar, alarms and calibration

• LCD 8× 40 or 4× 44 with step-up converter

• Up to 24 capacitive sensing channels: support touchkey, linear and rotary touch sensors

• 16x timers: 2x 16-bit advanced motor-control, 2x 32-bit and 5x 16-bit general purpose, 2x 16- bit basic, 2x low-power 16-bit timers (available in Stop mode), 2x watchdogs, SysTick timer

• Memories – Up to 1 MB Flash, 2 banks read-whilewrite, proprietary code readout protection

– Up to 128 KB of SRAM including 32 KB with hardware parity check

– External memory interface for static memories supporting SRAM, PSRAM, NOR and NAND memories

– Quad SPI memory interface

• 4x digital filters for sigma delta modulator

• Rich analog peripherals (independent supply)

– 3x 12-bit ADC 5 Msps, up to 16-bit with hardware oversampling, 200 µA/Msps

– 2x 12-bit DAC output channels, low-power sample and hold

– 2x operational amplifiers with built-in PGA

– 2x ultra-low-power comparators

• 20x communication interfaces

– USB OTG 2.0 full-speed, LPM and BCD

– 2x SAIs (serial audio interface)

– 3x I2C FM+(1 Mbit/s), SMBus/PMBus

– 5x USARTs (ISO 7816, LIN, IrDA, modem)

– 1x LPUART (Stop 2 wake-up)

– 3x SPIs (and 1x Quad SPI)

– CAN (2.0B Active) and SDMMC interface

– SWPMI single wire protocol master I/F

– IRTIM (Infrared interface)

• 14-channel DMA controller

• True random number generator

• CRC calculation unit, 96-bit unique ID

• Development support: serial wire debug (SWD), JTAG, Embedded Trace Macrocell™

• All packages are ECOPACK2® compliant